» vcd_firewall_rules

Provides a vCloud Director Firewall resource. This can be used to create, modify, and delete firewall settings and rules.

» Example Usage

resource "vcd_firewall_rules" "fw" {
  edge_gateway   = "Edge Gateway Name"
  default_action = "deny"

  rule {
    description      = "deny-ftp-out"
    policy           = "deny"
    protocol         = "tcp"
    destination_port = "21"
    destination_ip   = "any"
    source_port      = "any"
    source_ip        = "10.10.0.0/24"
  }

  rule {
    description      = "allow-outbound"
    policy           = "allow"
    protocol         = "any"
    destination_port = "any"
    destination_ip   = "any"
    source_port      = "any"
    source_ip        = "10.10.0.0/24"
  }
}

resource "vcd_vapp" "web" {
  # ...
}

resource "vcd_firewall_rules" "fw-web" {
  edge_gateway   = "Edge Gateway Name"
  default_action = "drop"

  rule {
    description      = "allow-web"
    policy           = "allow"
    protocol         = "tcp"
    destination_port = "80"
    destination_ip   = "${vcd_vapp.web.ip}"
    source_port      = "any"
    source_ip        = "any"
  }
}

» Argument Reference

The following arguments are supported:

  • edge_gateway - (Required) The name of the edge gateway on which to apply the Firewall Rules
  • default_action - (Required) Either "allow" or "deny". Specifies what to do should none of the rules match
  • rule - (Optional) Configures a firewall rule; see Rules below for details.
  • org - (Optional; v2.0+) The name of organization to use, optional if defined at provider level. Useful when connected as sysadmin working across different organisations
  • vdc - (Optional; v2.0+) The name of VDC to use, optional if defined at provider level

» Rules

Each firewall rule supports the following attributes:

  • description - (Required) Description of the fireall rule
  • policy - (Required) Specifies what to do when this rule is matched. Either "allow" or "deny"
  • protocol - (Required) The protocol to match. One of "tcp", "udp", "icmp" or "any"
  • destination_port - (Required) The destination port to match. Either a port number or "any"
  • destination_ip - (Required) The destination IP to match. Either an IP address, IP range or "any"
  • source_port - (Required) The source port to match. Either a port number or "any"
  • source_ip - (Required) The source IP to match. Either an IP address, IP range or "any"