» telefonicaopencloud_networking_router_route_v2

Creates a routing entry on a TelefonicaOpenCloud V2 router.

» Example Usage

resource "telefonicaopencloud_networking_router_v2" "router_1" {
  name           = "router_1"
  admin_state_up = "true"

resource "telefonicaopencloud_networking_network_v2" "network_1" {
  name           = "network_1"
  admin_state_up = "true"

resource "telefonicaopencloud_networking_subnet_v2" "subnet_1" {
  network_id = "${telefonicaopencloud_networking_network_v2.network_1.id}"
  cidr       = ""
  ip_version = 4

resource "telefonicaopencloud_networking_router_interface_v2" "int_1" {
  router_id = "${telefonicaopencloud_networking_router_v2.router_1.id}"
  subnet_id = "${telefonicaopencloud_networking_subnet_v2.subnet_1.id}"

resource "telefonicaopencloud_networking_router_route_v2" "router_route_1" {
  depends_on       = ["telefonicaopencloud_networking_router_interface_v2.int_1"]
  router_id        = "${telefonicaopencloud_networking_router_v2.router_1.id}"
  destination_cidr = ""
  next_hop         = ""

» Argument Reference

The following arguments are supported:

  • region - (Optional) The region in which to obtain the V2 networking client. A networking client is needed to configure a routing entry on a router. If omitted, the region argument of the provider is used. Changing this creates a new routing entry.

  • router_id - (Required) ID of the router this routing entry belongs to. Changing this creates a new routing entry.

  • destination_cidr - (Required) CIDR block to match on the packet’s destination IP. Changing this creates a new routing entry.

  • next_hop - (Required) IP address of the next hop gateway. Changing this creates a new routing entry.

» Attributes Reference

The following attributes are exported:

» Notes

The next_hop IP address must be directly reachable from the router at the telefonicaopencloud_networking_router_route_v2 resource creation time. You can ensure that by explicitly specifying a dependency on the telefonicaopencloud_networking_router_interface_v2 resource that connects the next hop to the router, as in the example above.

» Import

Routing entries can be imported using a combined ID using the following format: <router_id>-route-<destination_cidr>-<next_hop>

$ terraform import telefonicaopencloud_networking_router_route_v2.router_route_1 686fe248-386c-4f70-9f6c-281607dad079-route-