» openstack_networking_subnet_v2

Use this data source to get the ID of an available OpenStack subnet.

» Example Usage

data "openstack_networking_subnet_v2" "subnet_1" {
  name = "subnet_1"
}

» Argument Reference

  • region - (Optional) The region in which to obtain the V2 Neutron client. A Neutron client is needed to retrieve subnet ids. If omitted, the region argument of the provider is used.

  • name - (Optional) The name of the subnet.

  • dhcp_enabled - (Optional) If the subnet has DHCP enabled.

  • dhcp_disabled - (Optional) If the subnet has DHCP disabled.

  • ip_version - (Optional) The IP version of the subnet (either 4 or 6).

  • ipv6_address_mode - (Optional) The IPv6 address mode. Valid values are dhcpv6-stateful, dhcpv6-stateless, or slaac.

  • ipv6_ra_mode - (Optional) The IPv6 Router Advertisement mode. Valid values are dhcpv6-stateful, dhcpv6-stateless, or slaac.

  • gateway_ip - (Optional) The IP of the subnet's gateway.

  • cidr - (Optional) The CIDR of the subnet.

  • subnet_id - (Optional) The ID of the subnet.

  • subnetpool_id - (Optional) The ID of the subnetpool associated with the subnet.

  • network_id - (Optional) The ID of the network the subnet belongs to.

  • tenant_id - (Optional) The owner of the subnet.

» Attributes Reference

id is set to the ID of the found subnet. In addition, the following attributes are exported: