» aws_lb_target_group

Provides a Target Group resource for use with Load Balancer resources.

» Example Usage

resource "aws_lb_target_group" "test" {
  name     = "tf-example-lb-tg"
  port     = 80
  protocol = "HTTP"
  vpc_id   = "${aws_vpc.main.id}"
}

resource "aws_vpc" "main" {
  cidr_block = "10.0.0.0/16"
}

» Argument Reference

The following arguments are supported:

  • name - (Optional, Forces new resource) The name of the target group. If omitted, Terraform will assign a random, unique name.
  • name_prefix - (Optional, Forces new resource) Creates a unique name beginning with the specified prefix. Conflicts with name. Cannot be longer than 6 characters.
  • port - (Required) The port on which targets receive traffic, unless overridden when registering a specific target.
  • protocol - (Required) The protocol to use for routing traffic to the targets.
  • vpc_id - (Required) The identifier of the VPC in which to create the target group.
  • deregistration_delay - (Optional) The amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds.
  • stickiness - (Optional) A Stickiness block. Stickiness blocks are documented below. stickiness is only valid if used with Load Balancers of type Application
  • health_check - (Optional) A Health Check block. Health Check blocks are documented below.
  • target_type - (Optional) The type of target that you must specify when registering targets with this target group. The possible values are instance (targets are specified by instance ID) or ip (targets are specified by IP address). The default is instance. Note that you can't specify targets for a target group using both instance IDs and IP addresses. If the target type is ip, specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
  • tags - (Optional) A mapping of tags to assign to the resource.

Stickiness Blocks (stickiness) support the following:

  • type - (Required) The type of sticky sessions. The only current possible value is lb_cookie.
  • cookie_duration - (Optional) The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).
  • enabled - (Optional) Boolean to enable / disable stickiness. Default is true

Health Check Blocks (health_check):

  • interval - (Optional) The approximate amount of time, in seconds, between health checks of an individual target. Minimum value 5 seconds, Maximum value 300 seconds. Default 30 seconds.
  • path - (Optional) The destination for the health check request. Default /.
  • port - (Optional) The port to use to connect with the target. Valid values are either ports 1-65536, or traffic-port. Defaults to traffic-port.
  • protocol - (Optional) The protocol to use to connect with the target. Defaults to HTTP.
  • timeout - (Optional) The amount of time, in seconds, during which no response means a failed health check. For Application Load Balancers, the range is 2 to 60 seconds and the default is 5 seconds. For Network Load Balancers, you cannot set a custom value, and the default is 10 seconds for TCP and HTTPS health checks and 6 seconds for HTTP health checks.
  • healthy_threshold - (Optional) The number of consecutive health checks successes required before considering an unhealthy target healthy. Defaults to 3.
  • unhealthy_threshold - (Optional) The number of consecutive health check failures required before considering the target unhealthy . For Network Load Balancers, this value must be the same as the healthy_threshold. Defaults to 3.
  • matcher (Optional, only supported on Application Load Balancers): The HTTP codes to use when checking for a successful response from a target. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299").

» Attributes Reference

The following attributes are exported in addition to the arguments listed above:

  • id - The ARN of the Target Group (matches arn)
  • arn - The ARN of the Target Group (matches id)
  • arn_suffix - The ARN suffix for use with CloudWatch Metrics.
  • name - The name of the Target Group

» Import

Target Groups can be imported using their ARN, e.g.

$ terraform import aws_lb_target_group.app_front_end arn:aws:elasticloadbalancing:us-west-2:187416307283:targetgroup/app-front-end/20cfe21448b66314